A nicely painted room is one that displays clean lines and looks polished. The moldings and trim play a significant part in what gives a space its style. Therefore, it’s important to provide them with the attention they need. In this post, you will learn how to properly prep and paint moldings and trim so that you can complete the look of your house.
Related: Beautiful Wall Paint Designs 2020
Preparation
Moldings and trim come in different forms, such as base moldings, door casings, and crown molding. With proper preparation and painting techniques, these small details stand out in a room. To paint your moldings and trim, you will need the following supplies.
- Masking tape
- Paintbrush
- Sandpaper
- Buckets
- Spackle
- Putty knife
- Caulk and caulking gun
- Dust mask
- Gloves
- Goggles
- Drop cloth
With that said, before you begin priming, you want to fill in any holes with spackle and then sand them out until they are smooth. Then, you will want to inspect the molding and lightly sand it to improve adhesion and make sure your paint surface is flat. If you notice any gaps in the moldings and the wall, or cracks at the corner joints, you’re going to want to fill them in by using a caulking gun. This will allow you to get a smooth finish. Remember always to keep a wet rag or bucket on hand whenever you’re working with caulking.
Begin Taping
Before you begin any taping, you want to remove any dust with a vacuum to help your tape stay in place. After that, you can mask off your walls, so you don’t get any paint on them. This is especially important if the color you’re using is different than the one that is on your wall. You also want to run your finger along the edge of the wall to prevent paint from bleeding underneath. This will give you a clean and crisp straight line.
Related: How to Choose the Right House Painter in Brisbane
Protect your Flooring
To maintain your floors, place canvas drop cloths underneath any areas that will be painted. You also might want to consider using carpet guards when painting baseboard trim in carpeted rooms. However, before you paint, don’t forget to prime any patched or unfinished areas. If your molding or trim were painted before with oil-based paint, you would need to prime it to get adhesion.
If you’re not sure it was painted with oil-based paint, you can play it safe and prime it anyway. You must check to see if it needs to be sanded down before you begin painting. If it does, use high-grade sandpaper to prevent any sanding marks from showing through the finish.
In Summary
Once you have finished preparing your moldings and trim, you can begin to paint. Once you have completed and the paint is dry, remember to remove the masking tape slowly. You don’t want to leave the tape on the surface too long. If you do, it could be harder to remove without damaging the paint. However, doing the moldings and trim yourself can be extremely time-consuming, and a lot of hard work. Paisley Painting, is an Orlando professional painting contractor, who values quality work and customer service above all else! Therefore, if you decide to seek out professional services, contact us today!
Read Also:
1 Comment
the best way to to paint the baseboards is putting Blue Masking tape 3″ all around the baseboard and on the wall to avoid painting areas where you don’t want to paint. and remove it is super easy asn get with a clean paint job that is the way we do it in Orlando Painters